Surely, I know how important it is for you to know How Chainsaw Oiler Works?
Moreover, we know very well about the issues arising because of poor lubrication of the saw. For instance, the issue of kickback, damage to the chain, motor, and the engine of the saw.
So, let’s make things easier and talk in detail about the working of the oiler.
How Chainsaw Oiler Works – The Magic of Lubrication:
Lubrication is the essence of the saw:
However, before we dive into details about the oiler of the saw, let’s look at the things that come together for making it work:
- Pump button
- Oil reservoir.
- Oil pump.
- Bar oil.
- Adjustable screw (in an adjustable oiler).
- Worm drive
- Chainsaw nose sprocket.
1. How Does the Chainsaw Oiler Work?
Before we try to understand its dynamics, we should know that an oiler is of three types because the functioning of each is different. The 3 types are:
- Manual oilers.
- Automatic oilers with a fixed flow.
- Automatic oilers with adjustable flow.
2. Want to Know the General Functionality of an Oiler?
- Firstly, you need to fill up the oil reservoir of the saw with the bar oil.
- Now the oiling process of the saw starts.
- Generally, when the oiler is engaged, the throttle simultaneously engages the oil pump and motor.
- The worm drive triggers the oil pump to release the oil towards the bar.
- From here, it is distributed evenly and efficiently across the blade surface as it is moving.
- As a result, the general heat level and friction being produced because of the cutting of the saw is reduced.
3. Where Does the Oil Go from Here?
From here the oil goes to the following places:
- The bearing chain surface.
- Furthermore, it moves along the bar.
- Next, it is passed to the bar groove where the chain drivers are.
- Lastly, if the saw has a sprocket, it goes there.
4. What Makes a Manual Oiler Work?
Push the button to release the oil. After that, the process is the same as has been described above.
The manual oiling system can lead to problems as at times you can forget to oil the saw and end up in a fix!
5. Automatic Oiler with a Fixed Flow – How Does It Work?
Alternatively, the oiling process is fully automated in it.
Moreover, lubrication is constantly released from the oil reservoir and passes on to the blade and saw through the worm drive.
You only need to keep an eye on the oil level of the reservoir and fill it up before it runs out of oil.
Easy, isn’t it?
The Functioning of an Automatic Oiler with an Adjustable Flow:
Undoubtedly, this type of oiler comes with an adjustable screw that lets you regulate the oil flow.
Furthermore, when you want to put a pause to the oil flowing in the saw, you need to rotate the adjustable screw.
After you have done this, it does not flow anymore. On the other hand, when you release the screw, the process starts all over again. Thus, oil flow does not stop.
Read on to know some pro tips to keep lubrication on point:
Do not, I repeat, do not use just any kind of oil in your saw.
I have seen people mess up their saws by trying to save money by using sub-standard oils. You need to go for a high-quality bar oil that has the proper viscosity, which ensures that it does not stick to your blade.
And to wrap it all up:
Also, some chainsaws come with a nose sprocket. If your saw has one, you need to know that a simple oiler will not do the job. You have to squeeze the grease into the grease socket hole with the help of a grease gun.
To sum up, we have talked about How Chainsaw Oiler Works. Furthermore, this article gives you detailed information about the dynamics of an oiler working which includes everything from the oil reservoir to the worm drive to the blade of the saw.